The RoadMixer® 10 is the flagship unit in the RoadMixer® Series of mobile volumetric hot mix asphalt mixing and delivery systems. The RoadMixer® Series mobile units leverage proven and reliable volumetric mixing systems, similar to volumetric concrete mixers, coupled with new proprietary patented asphalt technology providing the ability to produce hot mix asphalt from raw materials carried on- board or from materials on the job site. The RoadMixer® 10 virtually eliminates wasted product and puts the operator in complete control of the paving job. The RoadMixer® 10 is designed specifically for the road repair contractor providing new opportunities by increasing capabilities and lowering overall road maintenance costs for the customer. RoadMixer® Series mobile asphalt systems deliver hot mix asphalt, wherever and whenever you need it. Asphalt On Demand
"The RoadMixer® is the future."
— John Schivito, A–Jon Construction, Philadelphia, PA
Repair once. Any season. Any time.
Unmixed, raw materials can be filled in the aggregate bins at any time.
Advantages
The RoadMixer® Series may be equipped with external equipment such as an infrared heater providing for seamless patching without regard for the season or an emulsion system for tack coating repairs depending on regional municipal requirements.
The on-board melt system and tank provides the contractor the ability to work independently of the local or regional hot mix asphalt batch plant meaning four season operational ability.
Convenient tool storage allows the operator and crew to carry the necessary tools to complete the job without the need for extra vehicles.
Rear discharge hopper allows the operator to hold material while the rest of the crew deposits mixed materials where needed. The rear hopper also swings 180 ° reaching the full width of the lanes on most roads.
Unmixed, raw materials can be filled in the aggregate bins at any time.
Options
The RoadMixer® Series may be equipped with external equipment such as an infrared heater providing for seamless patching without regard for the season or an emulsion system for tack coating repairs depending on regional municipal requirements.
The on-board melt system and tank provides the contractor the ability to work independently of the local or regional hot mix asphalt batch plant meaning four season operational ability.
Convenient tool storage allows the operator and crew to carry the necessary tools to complete the job without the need for extra vehicles.
Rear discharge hopper allows the operator to hold material while the rest of the crew deposits mixed materials where needed. The rear hopper also swings 180 ° reaching the full width of the lanes on most roads.
The contractor controls the distributions.
Specifications
Overall Capacity:10 tonsCapacity based on 54,000 GVW chassis.
Production Rate:3-9 tons perhour (TPH)Variable rate dependent on aggregate moisture content.
Burner Fuel Type:#2 fuel oil or dieselAccepts either fuel for operator convenience.
Hot Mix Asphalt Type:Fine Mix or Binder MixOne (1) fine mix, One (1) coarse mix. Available two (2) customizable mixes per customer specifications.
Number of Material Bins:3One (1) sand (required); Two (2) stone - Variable multi-aggregate bins for fine or coarse material
Liquid Asphalt Capacity:114 US GallonsLiquid capacity based on US hazardous material specifications. Haz placard not required.
Other:On-board Melt SystemDesigned to work with flexi-bagged, solid asphalt cement.
Variable material distribution rates, 3 to 9 TPH.Professional Installation Crews.Complete, permanent repairs.
The RoadMixer® 10 is produced under several US patents with additional patents pending.
